Towards sustainability in 3D printing of thermoplastic composites: Evaluation of recycled carbon fibers as reinforcing agent for FDM filament production and 3D printing
Abstract The use of recycled Carbon Fibers (rCFs) into polylactic acid (PLA) matrix to produce new reinforced 3D printing filaments was assessed. Filaments containing 5 and 10 wt% of rCFs […]
Wettability of carbon nanotube-grafted carbon fibers and their interfacial properties in polypropylene thermoplastic composite
Abstract The interfacial properties of carbon fiber (CF) reinforced thermoplastic composites depend strongly on the wettability and surface characteristics of the reinforcing fibers, and their compatibility with a chosen matrix. […]
The effect of temperature field on the characteristics of carbon fiber reinforced thermoplastic composites in the laying and shaping process
Abstract This work investigates the temperature field during the automated layup of carbon fiber reinforced thermoplastic composites. The heat transfer boundary conditions of the layup process are determined by establishing […]
Mechanical properties and failure behavior of 3D printed thermoplastic composites using continuous basalt fiber under high-volume fraction
Highlights • 3D printing composites with high volume fraction continuous basalt fiber have been successfully prepared by FDM method. • The experimental results of Young’s modulus were well supported by […]
Surface free energy study of virgin and recycled carbon fiber reinforced thermoplastic composites | SpringerLink
This research paper reports the composite adhesion behavior of thermal treated recycled carbon fibers through contact angle and surface energy measurements and its results compared with virgin carbon fibers. Virgin […]
Veille NAE : Composite 20220627
Chaque semaine NAE vous propose une veille technologique sur une thématique de sa feuille de route technologique. Aujourd’hui retrouvez sa veille sur la thématique Composite qui abordera : A new […]
A new partially-infused fiber reinforced thermoplastic composite for improving impact resistance – ScienceDirect
High toughness fiber reinforced polymer composites are adopted for applications such as bulletproof shields, helmets and hard body armor that require high impact resistance as well as sufficient structural stiffness […]
Towards sustainability in 3D printing of thermoplastic composites: Evaluation of recycled carbon fibers as reinforcing agent for FDM filament production and 3D printing
The use of recycled Carbon Fibers (rCFs) into polylactic acid (PLA) matrix to produce new reinforced 3D printing filaments was assessed. Filaments containing 5 and 10 wt% of rCFs were […]
Des scientifiques ajoutent du sucre dans le PLA pour le rendre plus dégradable
Intégrer des molécules de sucre dans du plastique PLA pour le rendre plus dégradable ? Telle est la solution très sérieuse envisagée par des chercheurs de l’Université de Bath dans […]
Veille NAE : Composite 20220530
Chaque semaine NAE vous propose une veille technologique sur une thématique de sa feuille de route technologique. Aujourd’hui retrouvez sa veille sur la thématique Composite qui abordera : Wettability of […]